- 8CF4A18693D44043EEFDAA895AA98360 - 8CF4A18693D44043EEFDAA895AA98360

Fabric Mounting Track

 custom-acoustical-wall-system.png 
fabric-wall-finishing-system-copy.jpg fabric-mounting-frame-copy.jpg 
 
The way a "Stretched-Fabric Wall System" works is a three part process using a Fabric mounting track/frame, acoustical or tackable core material and the covering fabric... First, the track is attached to the wall around the perimeter of the area to be covered. Based on the fabric width, panels can be up to 5 1/2 feet by the length you desire. The layout therefore, does not require joints every 4 feet as traditional pre-made panels. After the track is installed, the core material is then in-filled inside the tracked perimeter. The last step is rolling the fabric into the track's locking jaws. The fabric is stretched over the substrate or core material and is pulled taut as not to sag or slip over time. 
The track holds the covering in place without the use of any adhesives. (No Mess & No Harmful Fumes) The importance of this is two fold. First it allows for the easy removal and replacement of the covering. Second, un-backed fabrics are used. Backed or glued fabrics (coverings) are NOT acoustically transparent and will lower the NRC of the panel. Some of the other advantages of a “track system” are; the track will automatically scribe to most conditions, almost unlimited panel sizes and shapes, NO field measurements needed, little or no lead time and gives a high-tech look that is impossible for wrapped panels to accomplish. 
1-inch-fabric-wall-specification-copy-copy.png  half-inch-fabric-wall-specification-copy-copy.png

 

 

 

Tech-Wall Inc. is a US based limited liability company (LLC) that is headquartered in Ventura, CA 93003.United States of America Tech-Wall inc. DBA Acoustical Wall Fabric.com 4564 Telephone Rd, Suite 802.Ventura, CA 93003. USA. web: info@tech-wall.com phone: (805)-642-7600 fax: (805)-642-0330